This panel mount cable fits a headphone port to custom panel. The 2 1x3 header connectors connect to mother-board audio header which supports speakers cut-off function.
Plugging of headphone on the custom panel disconnects motherboard's speaker socket located at the back of the PC.
For Intel standard AC97 audio header, please note that there's only 1 GND pin provided in the header/pinout. If you want to connect both headphone and microphone ports to AC97 audio header, please use P110-030.
HEADPHONE 1/8 2.5' - PANEL MOUNT B2
OTHER MATERIAL INCLUDED
Black: Back Line-Out Left / BL-Out L
Orange: Front Line-Out Left / L-Out L
The GND (ground) wire is fatter and can be easily recognized.
The 2 ground wires are shorted (connected) internally. It means only 1 ground wire needs to be connected to the ground pin. The other ground wire is for reserved purpose (i.e. no connection required).
For more details, please view product page of CPX090-B2.
|P090B2-030: 2.5 ft. Fits headphone port on custom panel/wall. Connects to audio pin-outs on mother-board. Bulk-head 0.125/3.5 stereo audio-out/line-out female to 1x3 header connectors - 0.1 inch/2.54 mm pitch. Supports speakers cut-off function (AC97 only). Works with HD (high definition) audio if it's backward compatible with AC97.|